[You must be registered and logged in to see this image.] As you can see from this picture, we use Perlite as an incubation medium. You can also see that there are no air holes in the servin’ saver. We will go into more of that later.
If you are wondering why the eggs are all dirty looking, it is because we use moist Vermiculite in all of our egg laying chambers. We have found it to be the best lay-box medium.
The next thing we need to do is figure out the proper way to provide the right amount of humidity for the eggs to hatch in. I incubate the eggs in a Perlite to water ratio of – 1 part Perlite to .8 parts water by weight. You will need a Digital scale to do this.
It has a capacity of 200 grams, and a readability of .1 grams, which makes it pretty accurate. You do not have to have one that is this accurate, but it is helpful if you are able to tare out the scale. We will go into more of that soon.
The picture below, shows the servin’ saver on the scale. We must tare out the scale to show zero weight. If your scale does not tare, you will need to weigh the servin' saver. This one weighs 61 grams.
[You must be registered and logged in to see this image.]The next thing we will do, is fill the servin' saver about 2/3rds full of Perlite, and place it back on the scale. (I would like to add a quick note here about the Perlite we use. I purchase it in four cubic foot bags from a garden. DO NOT USE Perlite with fertilizer that will promote mold growth in the very humid incubation environment. The mold will attack your eggs and kill them.)
[You must be registered and logged in to see this image.]As you can see, it weighs 58.6 grams. If your scale does not tare, it will weigh 119.6. In that case you will have to subtract the weight of the servin' saver (61 grams), from the total to come up with the 58.6 weight.
[You must be registered and logged in to see this image.]We will now multiply 58.6 grams times .8, and come up with a total of 46.88 grams. This is the amount of water that will be added to the Perlite.
[You must be registered and logged in to see this image.]If we add 59.6 and 46.8 together, we will come up with 105.4 grams. When we start to add water to the Perlite, this is the figure we will end up with. If your scale does not tare, your total will be 166.4.
[You must be registered and logged in to see this image.]I use a regular plant mister to hydrate the Perlite. I start at the top, and I mist all parts from top to bottom and then back and forth. I try to mist the whole top layer of Perlite evenly.
[You must be registered and logged in to see this image.]I keep on doing it till the scale reaches 105.5 (or 166.4 if your scale doesn't tare). The water will sink down into the bottom layer of the Perlite, and will never need to be re-hydrated again.
[You must be registered and logged in to see this image.]You are now ready to put your eggs in. I start at the top of the box and make sure they are tight enough so that four of them will fit across. I dig a small hole, and then put the egg in it. I then put a litle bit of the Perlite around the egg to ensure it doesn't move.
[You must be registered and logged in to see this image.]You are now ready to cover them. I mark the kind of Eggs they are (in this case they are Carrot-tails), and mark the date the first eggs were laid. Since there are no holes in the servin' saver, once they have been hydrated they will never have to be done again. What I do is open the boxes once a week for air exchange, and then cover them back up. With this method, you do not have to add water to the incubator either. The Perlite will release the proper amount of humidity.
They are now ready to go into your incubator.
[You must be registered and logged in to see this image.]You may have noticed the black marks that are on top of the eggs. Let me tell you why I do this. Once an embryo has started to form in the egg, it is very important that it is not moved. If it is, it can literally drown in the egg. To make sure that this does not happen, last year I started to put a small mark on top of the eggs when I found them in the lay box. I use a black fine point Sharpie to do so. You can see the uncovered eggs in the picture below.
[You must be registered and logged in to see this image.]This way, even if a new hatchling dislodged the egg from it’s original place in the incubation box, I would know which way to put it back in. The pictures below will show you what I mean.
In this picture the new hatchlings have dug up the incubation box.
[You must be registered and logged in to see this image.]This picture shows what it looks like after I have removed the new hatchlings. Note that a few of the eggs are out of place, and have no marks on top. If they were left like this, the embryos inside of the misplaced eggs would surely drown.
[You must be registered and logged in to see this image.]In this picture I have put the eggs back in the box, in the correct orientation. Hopefully I found them in time, and they all will hatch.
[You must be registered and logged in to see this image.]Most of our eggs are incubated to be Females, so instead of using an incubator for them I just keep them on a shelf in the Reptile room. I keep the room at a temperature between 79 - 82 degrees, which is the perfect temperature to produce Females. To produce Males, I use Hova-Bator incubators. I set them to a temperature of 87 - 88 degrees, which is the perfect temperature to produce Males.
I use a digital thermometer to calibrate the Hova-Bator. The one I use is a Taylor THERMO-HYGRO . One good thing about this model is that it gives you the Minumum and the Maximum temperature.
You can also use the thermometer to calibrate for Females at a temperature between 80 - 82, or at a temperature of between 84 - 86 to produce a mix of both sexes.
In the picture below I have the Minumum Temperature.
[You must be registered and logged in to see this image.]In this picture the incubator is at its highest temperature.
[You must be registered and logged in to see this image.]In this picture it is the correct 87 degrees.
[You must be registered and logged in to see this image.]Hopefuly this will get you started and
I wish everybody a great breeding season.